[URGENT]UART Bootloader and Application

[URGENT]UART Bootloader and Application

Postby vibhu » Tue Jul 16, 2019 2:37 pm

Hi Guys,
I have a query regarding UART boot loader application.

I am using a UART bootloader application which is given by MPLAB Harmony.. And I have an application.
I have attached the application in the loadables section of the bootloader.
I copied the same configuration bits settings for both the bootloader and the application.
But it is still giving an error
(944) data conflict at address 1FC005F0h.

Please Help.
I am attaching the linker file of both the bootloader and the application.
I am using PIC32mz1024EFE100 chip.

Regards,
Vibhu.
Attachments
btl_mz.txt.txt
linker file of the bootloader
(71.85 KiB) Downloaded 314 times
app_mz.txt.txt
linker file of application
(71.98 KiB) Downloaded 286 times
Last edited by vibhu on Wed Jul 17, 2019 5:39 am, edited 1 time in total.
vibhu
 
Posts: 2
Joined: Tue Jul 16, 2019 2:28 pm

Re: UART Bootloader and Application

Postby vibhu » Tue Jul 16, 2019 2:59 pm

When I am trying to build the application code separately its giving

Configuration Bits: address 0x1FC0FFC4: FPLLRNG = 7 does not match any valid value in the device database.
Setting to the default value.
Configuration Bits: address 0x1FC0FFC8: DMTCNT = 31 does not match any valid value in the device database.
Setting to the default value.
Loading completed

So, does that mean the application is still taking the configuration bits ?
I have commented out the configuration bits part i system_init.c
vibhu
 
Posts: 2
Joined: Tue Jul 16, 2019 2:28 pm


Return to PIC32 topics

Who is online

Users browsing this forum: No registered users and 7 guests

cron