Let's document the problems on the Microchip forum

Discussion on MPLAB's In Circuit Debuggers for select Microchip FLASH devices.

Re: Let's document the problems on the Microchip forum

Postby AussieSusan » Thu Sep 13, 2018 4:08 am

I'm surprised that the forum software suppliers let this go on for so long (assuming someone has told them).
I know that quite a number of the issues are to do with poor moderation and the firewall, but it certainly reflects badly on the forum suppliers as theirs is name that everyone sees.
Perhaps they see it as "only 1 sale" and therefore not too big an issue in the overall scale of things.
Susan
AussieSusan
Verified identity
 
Posts: 173
Joined: Mon Jun 16, 2014 4:45 am
PIC experience: Experienced Hobbyist

Re: Let's document the problems on the Microchip forum

Postby ric » Thu Sep 13, 2018 4:30 am

Plus it is an ancient version of the ASP vNext software.
Microchip have been using version 4.5 for years. The copyright message just displays the current year, it always updates on Jan-1.
Version 5 was released in 2013, and they are up to version 5.5 now.
Latest test project, an LED matrix display made from one reel of addressable LEDs. here
User avatar
ric
Verified identity
 
Posts: 659
Joined: Sat May 24, 2014 2:35 pm
Location: Melbourne, Australia
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby twelve12pm » Thu Sep 13, 2018 3:24 pm

AussieSusan wrote:I'm surprised that the forum software suppliers let this go on for so long (assuming someone has told them).
I know that quite a number of the issues are to do with poor moderation and the firewall, but it certainly reflects badly on the forum suppliers as theirs is name that everyone sees.
Perhaps they see it as "only 1 sale" and therefore not too big an issue in the overall scale of things.
Susan


Has anyone told them? I think someone should! If I needed to create a forum for my company, I'd be much more likely to choose phpBB because that's what appears on the bottom of this properly working forum!!
User avatar
twelve12pm
 
Posts: 12
Joined: Wed Aug 08, 2018 6:21 pm
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby jtemples » Sat Sep 22, 2018 1:14 am

I'm getting "The page isn’t redirecting properly" now.
jtemples
Verified identity
 
Posts: 195
Joined: Sun May 25, 2014 2:23 am
Location: The 805
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby ric » Sat Sep 22, 2018 7:30 am

I see you've been able to post since. I guess it was a temporary glitch.
Latest test project, an LED matrix display made from one reel of addressable LEDs. here
User avatar
ric
Verified identity
 
Posts: 659
Joined: Sat May 24, 2014 2:35 pm
Location: Melbourne, Australia
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby KTrenholm » Wed Nov 21, 2018 7:08 pm

They're really having a problem with spam posts the last week or two it seems.

Get ready for "Passport" to start triggering their firewall.
User avatar
KTrenholm
 
Posts: 26
Joined: Mon Sep 10, 2018 3:57 pm
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby jtemples » Sat Feb 23, 2019 6:22 pm

Is it broken again? I'm getting no response when posting from quick reply or the "full version".
jtemples
Verified identity
 
Posts: 195
Joined: Sun May 25, 2014 2:23 am
Location: The 805
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby crevicedweller » Wed Oct 14, 2020 8:45 pm

After many (at least 10) years as an occasional user of the Microchip forums I am now unable to post or do much of anything else. I have tried for over a week to work around these problems with no success. I read some threads describing how to work around similar issues. I tried another computer. I tried another browser. Nothing i did helped and there is no straightforward way to get help.
Finally i registered as a new user. That took about 36 hours to get approval. When i logged on as the new user i immediately encountered the same problems.
It took only a few minutes to register on this forum. Thanks!!
crevicedweller
 
Posts: 2
Joined: Wed Oct 14, 2020 8:24 pm
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby DominusRRR » Wed Oct 28, 2020 10:35 pm

Hi.

Currently, when I enter the forum and try to go to the subforum, I am expelled. It also happens that when I want to comment on a thread, I'm expelled from the forum and it asks me to enter my email and password.

I have opened a technical ticket for you to help me and they have suggested that I write to an email from the MCHP forum, but they have not responded yet.
DominusRRR
 
Posts: 6
Joined: Tue Oct 27, 2020 10:15 pm
PIC experience: Professional 5+ years with MCHP products

Re: Let's document the problems on the Microchip forum

Postby DominusRRR » Wed Oct 28, 2020 10:42 pm

crevicedweller wrote:After many (at least 10) years as an occasional user of the Microchip forums I am now unable to post or do much of anything else. I have tried for over a week to work around these problems with no success. I read some threads describing how to work around similar issues. I tried another computer. I tried another browser. Nothing i did helped and there is no straightforward way to get help.
Finally i registered as a new user. That took about 36 hours to get approval. When i logged on as the new user i immediately encountered the same problems.
It took only a few minutes to register on this forum. Thanks!!



I have exactly your problem, I tried everything, I even used a VPN to emulate a connection from another part of the world because I thought it was a regional problem, but still. And as you claim, I opened a new account with another email and the problem is the same.

They recommended me to write to this email: forumadmin@microchip.com but they have not responded yet.
DominusRRR
 
Posts: 6
Joined: Tue Oct 27, 2020 10:15 pm
PIC experience: Professional 5+ years with MCHP products

PreviousNext

Return to MPLAB ICD In Circuit Debuggers

Who is online

Users browsing this forum: No registered users and 1 guest

cron