Help with WINPIC please

Enhanced mid-range devices. PIC12F1xxx and PIC16F1xxx

Help with WINPIC please

Postby larny » Fri May 03, 2019 11:55 pm

I gave up trying to programme a 16F1708 with PICKIT3 as it (i.e. PK3) appears to be faulty (I tried several suggestions from people on other forums but nothing worked.
Several said that the PK3 "is a pain".
I have always used WINPIC to programme PICs, but the 16F1708 is not included.

I tried to enter the 16F1708 into WINPIC according to the WINPIC help document "Help - my PIC is not supported".
I managed to do part of it, but eventually came to an impasse. I could not work out what to do next. The instructions are not clear.

Does anyone know how to do it? I have attached a screen grab of the WINPIC screen which shows how far I got.
The first screen grab shows the same screen for a 12F675.

Any assistance will be appreciated.
Attachments
WINPIC 675 a.jpg
WINPIC 675 a.jpg (108.04 KiB) Viewed 2531 times
WINPIC 1708.jpg
WINPIC 1708.jpg (65.32 KiB) Viewed 2531 times
larny
 
Posts: 4
Joined: Thu Oct 23, 2014 5:36 am
Location: Melbourne Australia
PIC experience: Experienced Hobbyist

Re: Help with WINPIC please

Postby ric » Sat May 04, 2019 12:11 am

Sorry, I've never used winpic, can't help you there.
Which is your topic on the Microchip forum?
I have two PK3s, and have only ever had problems when jumping between MPLAB8 and MPLABX. Forcing the PK3 back into bootloader mode with the button has always fixed that.
Latest test project, an LED matrix display made from one reel of addressable LEDs. here
User avatar
ric
Verified identity
 
Posts: 659
Joined: Sat May 24, 2014 2:35 pm
Location: Melbourne, Australia
PIC experience: Professional 5+ years with MCHP products


Return to 14-Bit Core (enhanced)

Who is online

Users browsing this forum: No registered users and 13 guests