ZigBee Pro software

ZigBee Pro software

Postby cncmachineguy » Sun Jun 18, 2017 12:43 am

Hi All,
I want to do some ZigBee HA stuff with this device:
http://www.microchip.com/wwwproducts/en/en535967

Does anyone know how and if possible where uChip hides the ZigBee pro librarys. Or how to implement it by hand if Need be? Don't get me wrong, I assume if I need to do it by hand I need to get a copy of the protocol and get to work.

Hoping there is a better way than that.
-Bert
User avatar
cncmachineguy
 
Posts: 21
Joined: Sun Nov 16, 2014 8:52 pm
PIC experience: Professional 5+ years with MCHP products

Re: ZigBee Pro software

Postby AussieSusan » Mon Jun 19, 2017 3:46 am

Go to the page you link to; look down the bottom to the 'Documentation' section and open that up; at the bottom is the link to the Microchip Library for Applications.
In their infinite wisdom, Micorchip have actually made the destination of that link "access denied" (at least to me) but(currently) the link http://www.microchip.com/mplab/microchi ... plications works.
There are also a number of links such as http://www.microchip.com/forums/m595515.aspx that might help.
If all else fails, contact Microchip themselves.
Susan
AussieSusan
Verified identity
 
Posts: 75
Joined: Mon Jun 16, 2014 4:45 am
PIC experience: Experienced Hobbyist

Re: ZigBee Pro software

Postby cncmachineguy » Mon Jun 19, 2017 12:28 pm

Thanks Susan,

I too am "access denied". Thanks for the link to MLA, it does not seem to include ZigBee, at least not in the description or in the MLA I already have.

Interesting thread you linked, makes me feel as though I may not find this pot of gold.

uChip seems to want me to get software from Atmel for this, but that implies to me I should use something other than PIC32 or PIC anything.

Don't get me wrong, I am happy for them buying Atmel, but if I wanted to play with AT bla bla bla I would have done so long ago.

Guess I will submit a ticket to them and see what they say. Otherwise I assume it is code it myself, or give up on being ZigBee conforming.

-Bert
-Bert
User avatar
cncmachineguy
 
Posts: 21
Joined: Sun Nov 16, 2014 8:52 pm
PIC experience: Professional 5+ years with MCHP products

Re: ZigBee Pro software

Postby cncmachineguy » Mon Jun 19, 2017 1:00 pm

Support ticket submitted to uChip.
I will report back my findings :)

-Bert
-Bert
User avatar
cncmachineguy
 
Posts: 21
Joined: Sun Nov 16, 2014 8:52 pm
PIC experience: Professional 5+ years with MCHP products


Return to Zigbee and wireless topics

Who is online

Users browsing this forum: No registered users and 1 guest