PIC Tutorials, Learning to Program PIC MCUs

[ksmes]

A good place for the beginner to start learning about programming PIC Microcontrollers is the Gooligum Electronics website. Start with the Baseline PIC Architecture and Assembly Language Tutorial and work up from there. The lessons are planed out very well to give the beginner a good place to start.
http://www.gooligum.com.au/tutorials.html

[Ian.M]

+1

[DNA Robotics]

I found some good info here but there is a lot to sort thru:
http://www.microchip.com/videos.aspx

[dodgecharger4404]

My setup: Velleman K8048 programmer; PIC 16F627; MPLAB Ver. 5.40/XC8 on a serial port equipped Dell desktop, Windows 10-64 20H2. Programming in C; Don't want to use assembler; Hobbyist/small projects interest level. My problem is being unable to write the successfully compiled machine code to the PIC on the Velleman board. The Velleman K8048 wasn't listed in the programmer device list. I do have MPASM, but that doesn't take the assembler code generated by XC8.

Much online forum searching seems to indicate some are using a similar setup with success. Can someone give me a pointer or 10. If necessary, a PIC Kit 3/4 or Googlium product will be purchased, but would like to use what I have if possible. Older computer with XP is available if Win10-64 is a non-starter. Since these Velleman boards are still being sold, I'd think buyers thereof are using them successfully.

[ric]

My setup: Velleman K8048 programmer; PIC 16F627; MPLAB Ver. 5.40/XC8 on a serial port equipped Dell desktop, Windows 10-64 20H2. Programming in C; Don't want to use assembler; Hobbyist/small projects interest level. My problem is being unable to write the successfully compiled machine code to the PIC on the Velleman board. The Velleman K8048 wasn't listed in the programmer device list. I do have MPASM, but that doesn't take the assembler code generated by XC8.

Much online forum searching seems to indicate some are using a similar setup with success. Can someone give me a pointer or 10. If necessary, a PIC Kit 3/4 or Googlium product will be purchased, but would like to use what I have if possible. Older computer with XP is available if Win10-64 is a non-starter. Since these Velleman boards are still being sold, I'd think buyers thereof are using them successfully.

Please don't ask the same question in multiple locations. Your other copy has been answered at viewtopic.php?t=853